No announcement yet.

Looking For Lawn Edger

  • Filter
  • Time
  • Show
Clear All
new posts

  • Looking For Lawn Edger

    I am looking for a very good Lawn Edger and would like to know which is the best one to buy?

    I will be using it to edge my lawn and flower beds.

    I would like a gas powered one.

    I do not want a chap one that will not do a good job, an on the other hand I don't want to spend $500.00 for one ether.

    I do not know anything about them, that is why I came to you for your help.

    Which is the Top of the Line in Lawn Edgers?

    Which gaves you the less amount of trouble?

  • #2
    There is something special about watching a lawn you just cut and edged. The smell of freshly cut grass / cut! A sense of personal pride! Only a combination of things that time brings all their other thoughts, worries and concerns aside. Indeed, a "feel good about yourself" time and a moment to savor! To help you enjoy that moment a little more, here are some tips and reminders about the use of 101 McLane lawn edger / trimmer.
    1. Usually, you want to set the depth of cut edger blade for the cutting blade is about 1 "deep in the ground. Adjusting the depth at this level will allow you to get to cut the grass roots.
    2. If possible, not the edge of your lawn when wet. Wait until the grass is dry! Edges of your lawn when wet does not give you as clean and neat looking cut. In addition, the edges of wet grass has a tendency to clog the guard blade edger.
    3. When I sing on the outside (no pole) of a fence, adjust the angle of the blades of the cutting edges of blade angles and a little under the fence. Edge carefully so that the blade does not hit the fence itself.
    4. For a professional-looking cut over flower beds and gardens, set the blade at an angle of 15 to 20 so the bottom of the blade is angled toward the flower bed / garden.
    5. When I sing along driveways and sidewalks, pushing his McLane edger in their normal walking speed. (Note: At the edge of your garden for the first time at the beginning of the song / cut the season, I found that I take my edger in 2 steps forward then one step back and then forward two steps back and one step, focus, etc. produces the best results from the edges. This two steps forward and one step back approach does a good job of cleaning the area of ​​Blade Edger along the road / sidewalk that has been filled with soil during winter.
    6. Reminder: With McLane edger 101, there is no need to mix oil with gasoline.
    7. As with any piece of equipment, will be worth your time to read the operator's manual 15 pages McLane edger before starting to operate your trimmer the first time. (Actually, there are only about 7 1 / 2 pages of easy reading. The rest of the cover pages, photos, parts list, note pages maintenance, etc)
    8. When I sing along curbs, you may want to try removing the splitter bar between the front and then moving the wheel from the right against the left wheel and re-enter the space bar on the right leg for side wheels. This should provide your edger with a better balance as you cut along the sidewalk. Important: Make sure you have the edger was completely out before you start to remove the spacebar / move the front wheels.
    9. Use a viscosity synthetic 5W-30 or SAE 10W-30 motor oil grade in McLane edger 101. This will provide the best temperature range for operation of the edger. Many people use motor oil SAE 30 degrees, but if you use your edger with oil SAE 30 degrees when the outside temperature is below 40 degrees, the trimmer can be more difficult to start.
    10. A good habit to get into is to substantiate the level of its oil edger every time you use your edger.


    • #3
      A lawn edger depends on the size of your loan if you have big lawn then you should choose a gas powered lawn edger which will maintain your lawn in a less time.


      • #4
        Spam alert!