convertible mower

[Clim Cadidlehopper]

I sitting here with my thinking cap on, I can see the ability of it hanging on a hillside in walk behind mode but, getting it into tighter places than you could while seated, hum if I can't get the deck under it with me sitting on it I'm not gona shove it under there without me on it. If the limb's are that low I use my 21", I string trim then 21" around the house and other obstacle’s I do not want to take a chance of scuffing so I just catch mow around them with it. I can darn near get my 48” just about everywhere. If the gate is to small and I have a few accounts like that, takes me bout 3 min’s tops with my screw gun and wrench, to remove the three bolts on the fence. Now I have a 8 or 10 foot hole. As for the hill’s if its to steep to mow sideways I go up and down, if it wont go up it either forward or backward, then you can’t walk it anyway.

[The landscaper]

The reason i was looking at this mower is because i just picked up a couple big accounts. i just wanted something like a 60" rider that was fairly cheap, because i will only use it a half day each week. So, who knows. i have to think things through. see what works best

[Clim Cadidlehopper]

Landscaper, that's kind of why I bought my tiger cub sort of the best of both worlds, able to maneuver in and around 98% of the places, and like all of the good ZTR’s if done properly it leaves a small foot print if any.
Fast enough to do the larger job’s. If they are much larger than my norm, my acre price allows me to make money. Granted it take’s a bit more time than the 60” deck’s but I find I do not have to drag out the 21” near as much as I would if I had larger than I have now. Only regret is I did not get the 52” deck ahh live and learn.

[vdeegan]

Clim T. Cadidlehopper,
Please check your PM. Thanks.
Vince

[The landscaper]

i was actually looking at a tiger cub, looks like a nice little unit. I am actually buying a 50 or 52 inch rider right now. So i have that too. i will need a couple riders on the accounts i just picked up.

[jschlenker]

toro toro!

I have a toro walk behind, 32'' t-bar gear. if I sit on the motor and grab the control rods it works fine. got the idea from some vietnamese guy who had the same mower but welded long handles to the idler pulley bracket for easier control and put a seat on the motor. I don't think he ever walks. Makes for a compact rider.

[RRS]

I have a toro walk behind, 32'' t-bar gear. if I sit on the motor and grab the control rods it works fine. got the idea from some vietnamese guy who had the same mower but welded long handles to the idler pulley bracket for easier control and put a seat on the motor. I don't think he ever walks. Makes for a compact rider.

LOL! Good one!