hi, I am putting in a sprinkler system at my house which runs on a well
the pump is a 1.5hp that does 20gpm 200feet heAD The well company says. I am looking for information on how to find out how to find out how many sprinkler heads to run at once so my pump will not turn on and off or not run on very low pressure. the pressure switch is a 40/60 switch
I plan to run hunter mp rotator heads
I will take all the suggestions
My original plan was to buy a flow meter and flow the water and just restrict the flow til the pump ran for a while without cutting in and out
then i figure ive found my operating pressure by looking at the guage on the tank.. sound good?
------
Irrigation Performance Audit and Reporting Tool Public Access Website at
http://139.86.208.170/kmsi/public_search.php
http://ipert.ncea.biz/
http://ipart.ncea.biz/
the pump is a 1.5hp that does 20gpm 200feet heAD The well company says. I am looking for information on how to find out how to find out how many sprinkler heads to run at once so my pump will not turn on and off or not run on very low pressure. the pressure switch is a 40/60 switch
I plan to run hunter mp rotator heads
I will take all the suggestions
My original plan was to buy a flow meter and flow the water and just restrict the flow til the pump ran for a while without cutting in and out
then i figure ive found my operating pressure by looking at the guage on the tank.. sound good?
------
Irrigation Performance Audit and Reporting Tool Public Access Website at
http://139.86.208.170/kmsi/public_search.php
http://ipert.ncea.biz/
http://ipart.ncea.biz/