Announcement

Collapse
No announcement yet.

Hydroseeding

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hydroseeding

    Hello,
    I am in need of a new hydroseeding nozzle. I am looking for a wider spray pattern, with a thinner slurry running through it. Currently the one I am using for wide open, close areas is spraying to narrow, it works better if you cut the volume in half with your finger to spray thicker. It sprays about 35 feet and only 2' wide or so. I am looking for the same distance but 5-10' wide with better coverage. The seeder is an older Finn model, 800 Gallon. 2.5" hose. Thanks!
    Andrew

  • #2
    We have an old old Finn hydro-seeder where I work. Seems that there were a variety of nozzles on that thing. I made a few of them myself. Some were just pieces of pipe ,1/2 - 1 in. that were flattened on the end . One even had a spoon looking tip to fan the spray out. they were used on the directional gun on top of the tank . Have you contacted Finn about nozzles ?

    Comment

    Working...
    X