Hello everyone,
I got the privelege to try out the 60 in. xtreme dixie chopper that goes 15 mph on several of my residential yards. I previously own a 48 in scag and there were several questions I had that I thought about after leaving the dealer. The dealer has only been dealing them for about a month and still new to D.C. himself.
The first question is about adjusting the cut. On the left in front beside the blade (engage, disengage) switch there is an adjuster with like 3-10 or something (not sure but they were in whole numbers). The dealer said there was more to it than just moving these and that the deck ws set from the factory. I cut several of my yards on different levels according to the customer and just wanted to know if there is a way to adjust say from 2.5 to 3.25 in quarter inch increments?
The next question is about the gas tanks. My scag has a switch that you switch to the side you are using while from my understanding the dixie chopper has both tanks running together? Is there a way to cut one side off etc? This seems like if it doesn't this would be aggrevating to constantly keep look and take the chance of running out in the middle of big yards.
The final questions were basic about the generac motor and D.C. overall. Are these mowers good as far as hours of use and as far as reliability?
I was impressed at the power and cut of the D.C. definitely and would like to make this the second mower to my lco. It sits alot higher than the scag we are using now and the handles, whoa, you barely have to touch to move compared to my scag. I just noticed that my scag had several features that the D.C. may or may not have that I would like to have and vice versa.
Again I apologize for the ignorance and like I said, the dealer has had them for 1 month now and still seemed not to now all of the questions either. Thanks for any and all feedback
I got the privelege to try out the 60 in. xtreme dixie chopper that goes 15 mph on several of my residential yards. I previously own a 48 in scag and there were several questions I had that I thought about after leaving the dealer. The dealer has only been dealing them for about a month and still new to D.C. himself.
The first question is about adjusting the cut. On the left in front beside the blade (engage, disengage) switch there is an adjuster with like 3-10 or something (not sure but they were in whole numbers). The dealer said there was more to it than just moving these and that the deck ws set from the factory. I cut several of my yards on different levels according to the customer and just wanted to know if there is a way to adjust say from 2.5 to 3.25 in quarter inch increments?
The next question is about the gas tanks. My scag has a switch that you switch to the side you are using while from my understanding the dixie chopper has both tanks running together? Is there a way to cut one side off etc? This seems like if it doesn't this would be aggrevating to constantly keep look and take the chance of running out in the middle of big yards.
The final questions were basic about the generac motor and D.C. overall. Are these mowers good as far as hours of use and as far as reliability?
I was impressed at the power and cut of the D.C. definitely and would like to make this the second mower to my lco. It sits alot higher than the scag we are using now and the handles, whoa, you barely have to touch to move compared to my scag. I just noticed that my scag had several features that the D.C. may or may not have that I would like to have and vice versa.
Again I apologize for the ignorance and like I said, the dealer has had them for 1 month now and still seemed not to now all of the questions either. Thanks for any and all feedback
Comment