My new sprayer thread

[hardboiled]

What's the deal here? I don't see the thread of Mr. Stones. Just get a reply box when clicking on the topic.

[GrassMaster]

What happened?

I have no idea what happened...

Yesterday there were 2 threads just a like & when I clicked on them I received an error & that's all there was. So I deleted one of them.

Maybe Mr. Stone will post it again.

Sorry Mr. Stone I have no idea what happened?

[Mike J]

There is some funny business going on here. When I am on the main page I see new posts to threads then I go into the topic and the new post isn't there.

[lawrence stone]

On Monday I am taking my 44" Toro hydro to the metal fabricator. The back of the machine where the sulky mounts needs help as usual. So while the machine is at the fabricator I am going to have him make a carrier that can hold two 5 gallon veggie oil jugs that can be quickly mounted to the deck carrier frame.

Mounted to this frame will not be just one but two sure-flow 12 volt pumps operated by two separate switches on the dashboard. A single broadcast fan nozzle is mounted to the front of the walk behind is feed from one tank, while the other tank feeds a hand wand that can be accessed from the operators possition using a length of pvc pipe is used as a holster.

Now what in need is a plumbing schematic so that I can draw from either or both tanks thru the broadcast sprayer or hand wand with the turning of a few manual ball valves. For example I want to be able to have one jug full of trimec and one jug with a few gallons of roundup and I want to be able to spray either and/or both products thru either the broadcast sprayer and/or the hand wand.

Anyone have any ides to set up this plumbing? I figure I need 5 on off valves with one crossover.

[jrservices]

On Monday I am taking my 44" Toro hydro to the metal fabricator. The back of the machine where the sulky mounts needs help as usual. So while the machine is at the fabricator I am going to have him make a carrier that can hold two 5 gallon veggie oil jugs that can be quickly mounted to the deck carrier frame.

Mounted to this frame will not be just one but two sure-flow 12 volt pumps operated by two separate switches on the dashboard. A single broadcast fan nozzle is mounted to the front of the walk behind is feed from one tank, while the other tank feeds a hand wand that can be accessed from the operators possition using a length of pvc pipe is used as a holster.

Now what in need is a plumbing schematic so that I can draw from either or both tanks thru the broadcast sprayer or hand wand with the turning of a few manual ball valves. For example I want to be able to have one jug full of trimec and one jug with a few gallons of roundup and I want to be able to spray either and/or both products thru either the broadcast sprayer and/or the hand wand.

Anyone have any ides to set up this plumbing? I figure I need 5 on off valves with one crossover.

Sounds good, but do you really want to spray roundup thru the same sprayer as Trimec?

[steve-o]

Sounds good, but do you really want to spray roundup thru the same sprayer as Trimec?

hell, you spray that trimec right now, you might as well have roundup.

steve